Dbserver-protocols

dbserver listens on several ports, each one providing a different service. Most services correspond to another server which will connect. All of these services use the common Network protocol, in TCP-only mode.

auction

AuctionServer connects to this service. It can receive the following commands:

AUCTION_SVR_CONNECT (2)

The message has no parameters. dbserver will accept only a single connection, and while it has one, it will respond to all further AUCTION_SVR_CONNECT messages by closing the connection.

dbserver responds with AUCTION_CLIENT_CONNECT (2):

packint(1) protocol_version
string shard_name
bits(1) have_inactive_players
something....

AUCTION_SVR_SEND_INV (3)

autobits entity_id
string inventory

dbserver finds the mapserver for entity_id, and proxies the message there as DBSERVER_AUCTION_SEND_INV

inventory is eventually decoded by AuctionInventory_FromStr in the mapserver, but dbserver proxies it without inspecting its value.

AUCTION_SVR_SEND_HISTORYINFO (4)

autobits entity_id
string identifier
autobits buying_count
autobits selling_count
autobits history_count
repeated history_count times:
  autobits date
  autobits price

dbserver finds the mapserver for entity_id, and proxies the message there as DBSERVER_AUCTION_SEND_HIST.

AUCTION_SVR_BATCH_SEND_ITEMINFO (5)

autobits entity_id
zipped data

dbserver finds the mapserver for entity_id, and proxies the message there as DBSERVER_AUCTION_BATCH_INFO. The zipped data is not inspected by dbserver.

After this output packet has been queued, dbserver sends AUCTION_CLIENT_DATAOK to the AuctioServer, with no both. This is a primitive form of flow control. It does not wait for the message to be sent to the mapserver before doing this.

AUCTION_SVR_XACT_CMD (7)

autobits entity_id
autobits type
XactCmd cmd

dbserver finds the mapserver for entity_id. If there is one, it proxies the message there as DBSERVER_AUCTION_XACT_CMD. If there is no mapserver, then dbserver responds to AuctionServer with AUCTION_CLIENT_XACT_UPDATE, sending:

autobits xid
autobits subid
autobits result

Where *xid* and *subid* are taken from *cmd*, and the result is set to *kXactCmdRes_No*.

AUCTION_SVR_RELAY_CMD_BYENT (9)

packint(1) entity_id
packint(1) force
string msg

dbserver finds the mapserver for entity_id. If there is one, it sends DBSERVER_RELAY_CMD there with *msg* as the body. If there is no mapserver, and force is set to 1, then the message is queued for relaying when the entity is available, and dbserver begins attempting to load the entity into a mapserver.

AUCTION_SVR_THROTTLE_ON (10)

This message has no parameters, and dbserver sends no response. It enables throttling, which prevents some (???) messages from being sent to the AuctionServer.

AUCTION_SVR_THROTTLE_OFF (11)

This message has no parameters, and dbserver sends no response. It disables throttling.

AUCTION_SVR_ACCOUNT_SHARDXFER (12)

OrderId order_id
autobits dbid

dbid is interpreted as an entity_id. dbserver will offline (???) and delete (???) the player, and then send AccountServer an ACCOUNT_CLIENT_SHARDXFER with:

OrderId order_id
autobits SHARDXFER_FULFILL_COMMIT_SRC

client

This service is used for the game client to communicate with dbserver.

It is documented on Client-to-dbserver

db

This service is used to communicate with MapServer and RaidServer.

Every NetLink for the db server has a unique lock_id, starting from 0. They are used to identify current connections to MapServer in order to send messages.

DBCLIENT_INITIAL_CONNECT

optional packint(1) map_protocol

If map_protocol is not present (the body is empty), it is 0. If map_protocol is not equal to DBSERVER_PROTOCOL_VERSION (currently 20110503) then dbserver will respond with DBSERVER_CLIENT_CMD_FAILED and close the NetLink.

Otherwise, dbserver sends these commands back to the MapServer:

DBSERVER_TIMEOFFSET:

bits(32) seconds_since_2000
float32 time_zone_delta

These values are set based on the system clock. time_zone_delta is the difference between UTC and local time, in hours.

DBSERVER_OVERRIDDEN_AUTHBITS

bits(128) overridden_auth_bits

The value of overridden_auth_bits is set based on OverrideAuthBit lines in servers.cfg.

If any DisabledZoneEvents entries are present in servers.cfg, dbserver sends a DBSERVER_DISABLED_ZONE_EVENTS command:

repeated string event

One entry for each DisabledZoneEvents line in servers.cfg

If user reactivation is active, dbserver sends a DBSERVER_NOTIFY_REACTIVATION message, with no body.

DBSERVER_UPDATE_LOG_LEVELS:

repeated LOG_LEVELS times:
  packint(1) log_level

These are the log levels, as managed by log.h, for all logging types in order from 0 to LOG_LEVELS. They are set in servers.cfg with SetLogLevel lines.

DBSERVER_ACCOUNTSERVER_CATALOG:

autobits catalog_timestamp
autobits auth_timeout
string mtx_environment
string play_span_domain
string play_spam_url_home
string play_spam_url_categoryview
string play_spam_url_itemview
string play_spam_url_showcart
string play_spam_url_addtocart
string play_spam_url_manageaccount
string play_spam_url_supportpage
string play_spam_url_supportpage_de
string play_spam_url_supportpage_fr
string play_spam_url_updatetovip
string coh_url_newfeatures
string coh_url_newfeaturesupdate
autobits play_span_store_flags

These appear to be values set in account_server.cfg. Most of them are URLs.

DBCLIENT_READY

This message is understood by dbserver, but does not appear to be sent by mapserver; it is suspected to be historical debris.

DBCLIENT_REGISTER

packint(1) map_id
packint(1) local_ip
packint(1) remote_ip
packint(1) udp_port
packint(1) tcp_port
packint(1) static_link
packint(1) cookie
string patch_version
optional string map_name

A MapServer sends this message when it starts up, immediately after DBCLIENT_INITIAL_CONNECT.

static_link is set based on the command line of the MapServer

map_id is a signed int, set on the command line of the MapServer. Negative values mean that a map_name field will be sent and edit mode will be used.

If map_id is non-negative, then dbserver selects the container for this mapserver based on map_id, and closes the link if the map_id is not known. Otherwise, dbserver selects the container based on map_name, and enables edit mode on this container. If static_link is set, then dbserver searches for a map with this name. If static_link is not set, or no map of this name is found, then a new map container is created and populated with the data in the map_name field.

udp_port and tcp_port are the ports on which the MapServer will listen for game clients, and are set on the command line.

cookie is set on the command line of the MapServer, and sent as-is. If the cookie is non-zero, then dbserver will validate that it matches the cookie matches the container referenced by map_id, and will close the link if it does not match. This is used to ensure the MapServer is the one this dbserver wanted to spawn, and not from a previous instance of dbserver.

local_ip and remote_ip are sent by the mapserver, based on the result of gethostbyname(NULL). They will use the first two results from this function. If one of those results is an rfc1918 address, or 127.0.0.1 (none of the other loopback addresses are recognised as "local"), then it will be local_ip; otherwise local_ip will be the first result from gethostbyname() and remote_ip will be the second.

The map container in the dbserver will have its link set to the link which sent this message, and will be marked starting and active. dbserver will respond to the MapServer with DBSERVER_CONTAINERS, sending the container for map_id followed by the containers for all static maps.

DBCLIENT_REGISTER_CONTAINER_SERVER

packint(1) list_id

The client attempts to claim ownership of the DbList identified by list_id. This is used by RaidServer to register itself with dbserver. Only one link may own a DbList at a time. If another link has claimed the DbList, then this one is marked as waiting for it. If the owner of the DbList is disconnected, then a link which is waiting for it will become the owner.

When a link becomes the owner of a DbList, then dbserver sends it a DBSERVER_CONTAINER_SERVER_ACK:

packint(1) list_id
packint(1) max_session_id

Owning a DbList affects the handling of DBCLIENT_CONTAINER_RELAY and DBCLIENT_REGISTER_CONTAINER_SERVER_NOTIFY messages.

DBCLIENT_REGISTER_CONTAINER_SERVER_NOTIFY

packint(1) notify_mask

All DbLists owned by this link have their notify mask set to notify_mask.

notify_mask is a bitmask, where each bit corresponds to a ContainerType value. For each bit set, when a notification for that DbList is available, a DBSERVER_CONTAINER_SERVER_NOTIFY will be sent:

packint(1) list_id
packint(1) container_id
packint(1) member_id
bits(1) is_added

Notifications are only sent for the addition of Ents (player characters loading onto a map), deletion of containers, and for adding and removing group members. When an Ent is added, an add notification is sent for all groups that Ent is currently a member of.

is_added is 1 if a thing is being added, and 0 if a thing is being removed.

container_id is the id of the container being updated - either the group where members are being added or removed, or the container being deleted.

member_id is 0 if the operation is the removal of a group (supergroup deletion, etc), or the member ID if the operation is adding or removing a member from a group.

DBCLIENT_READY_FOR_PLAYERS

packint(1) map_id

This message is sent by MapServer when it has finished settup in the map. It marks the MapCon as not starting. If the MapCon has been marked for shutdown in the dbserver, then the dbserver will respond with an empty DBSERVER_TEAM_LEFT_MISSION message.

DBSERVER_CONTAINERS

packint(1) user_data
packint(1) list_id
packint(1) count
repeated count times:
  packint(1) id
  packint(1) has_error
  packint(1) is_map_xfer
  packint(1) is_static_map
  packint(1) locked
  packint(1) is_deleting
  packint(1) demand_loaded
  packint(1) member_count
  repeated member_count times:
    packint(1) member_id
  string text

If has_error is 1, then the block for this container is replaced by:

  packint(1) map_id
  packint(1) has_error
  packint(1) error_code

This message is used to send containers to the MapServer. The contents of the container is represented in the text string.